Jak dotazovat tento výstup na SQL serveru

Dobrý den,

Zkontrolujte, zda níže uvedené řešení řeší všechny vaše potřeby. Testoval jsem to s vašimi daty a několika dalšími řádky, ale vždy je nejlepší to znovu zkontrolovat. Na první pohled se zdá, že vrací požadovaný výsledek. Později přidám vysvětlení

Dotaz, který používám, je tento:

DECLARE @Date DATE = '2018-06-12';
with MyCTE as (
    SELECT 
        t.CustName,t.Country,t.RecordedTime,t.CurrNo, D = CONVERT(DATE, RecordedTime)
        ,RN_D = ROW_NUMBER() 
            OVER (partition by t.CustName order by t.CurrNo desc)
        ,RN = ROW_NUMBER() 
            OVER (partition by t.CustName order by t.CurrNo)
        ,RN_Old = ROW_NUMBER() 
            OVER (partition by t.CustName, (CASE WHEN CONVERT(DATE, RecordedTime) < @Date then 0 else 1 END) order by t.CurrNo desc)
        ,Cnt = COUNT(*) 
            OVER (partition by t.CustName)
        ,CntToday = COUNT(CASE WHEN CONVERT(DATE, RecordedTime) = @Date THEN 1 ELSE NULL END) 
            OVER (partition by t.CustName)
    FROM Test t
    where 
        -- returns rows untill current date
        CONVERT (DATE, RecordedTime) <= @Date 
        -- only if relevnat to current date
        and EXISTS (
            SELECT * FROM test t0 
            where CONVERT (DATE, RecordedTime) = @Date and t0.CustName = t.CustName
        )
)
,MyCTE2 as (
    select
        CustName, Country, RecordedTime, D, CurrNo, RN_D, RN, Cnt, t2.c, History, CntToday, RN_Old
    from MyCTE t1
    left JOIN (select * from (values(1, 'NEW'),(1, 'BEFORE')) t2(c, History) ) t2 
        on t1.CurrNo = t2.c
            and CntToday > 1
            and D = @Date
    where 
        RN_D = 1 
        or (RN = 1 and D = @Date) 
        or (RN_Old = 1 and D < @Date)
)
,MyCTE3 as (
    select CustName, Country, RecordedTime
        -- unmarke the bellow comment in order to get the accessories columns I used
        -- This is recommended to understand the line-of-thinking
        --, D, c, RN_D, RN, CurrNo, Cnt, CntToday, RN_Old
        , History = CASE
            WHEN CurrNo = 1 and Cnt = 1 then 'NEW'
            WHEN RN_D = 1 then 'CURRENT'
            else ISNULL(History,'BEFORE')
        END
    from MyCTE2
)
select CustName, Country, RecordedTime--, D, c, RN_D, RN, CurrNo, Cnt, CntToday, RN_Old
    ,Audit = CASE when History='New' then 'ADD' else 'CHANGE'  END
    , History
from MyCTE3

Aby bylo testování jednodušší, vložím celý dotaz do tabulkové funkce

DROP FUNCTION IF EXISTS dbo.F
GO
CREATE FUNCTION dbo.F(@Date DATE)
RETURNS TABLE AS RETURN (

--DECLARE @Date DATE = '2018-06-12';
with MyCTE as (
    SELECT 
        t.CustName,t.Country,t.RecordedTime,t.CurrNo, D = CONVERT(DATE, RecordedTime)
        ,RN_D = ROW_NUMBER() 
            OVER (partition by t.CustName order by t.CurrNo desc)
        ,RN = ROW_NUMBER() 
            OVER (partition by t.CustName order by t.CurrNo)
        ,RN_Old = ROW_NUMBER() 
            OVER (partition by t.CustName, (CASE WHEN CONVERT(DATE, RecordedTime) < @Date then 0 else 1 END) order by t.CurrNo desc)
        ,Cnt = COUNT(*) 
            OVER (partition by t.CustName)
        ,CntToday = COUNT(CASE WHEN CONVERT(DATE, RecordedTime) = @Date THEN 1 ELSE NULL END) 
            OVER (partition by t.CustName)
    FROM Test t
    where 
        -- returns rows untill current date
        CONVERT (DATE, RecordedTime) <= @Date 
        -- only if relevnat to current date
        and EXISTS (
            SELECT * FROM test t0 
            where CONVERT (DATE, RecordedTime) = @Date and t0.CustName = t.CustName
        )
)
,MyCTE2 as (
    select
        CustName, Country, RecordedTime, D, CurrNo, RN_D, RN, Cnt, t2.c, History, CntToday, RN_Old
    from MyCTE t1
    left JOIN (select * from (values(1, 'NEW'),(1, 'BEFORE')) t2(c, History) ) t2 
        on t1.CurrNo = t2.c
            and CntToday > 1
            and D = @Date
    where 
        RN_D = 1 
        or (RN = 1 and D = @Date) 
        or (RN_Old = 1 and D < @Date)
)
,MyCTE3 as (
    select CustName, Country, RecordedTime
        -- unmarke the bellow comment in order to get the accessories columns I used
        -- This is recommended to understand the line-of-thinking
        --, D, c, RN_D, RN, CurrNo, Cnt, CntToday, RN_Old
        , History = CASE
            WHEN CurrNo = 1 and Cnt = 1 then 'NEW'
            WHEN RN_D = 1 then 'CURRENT'
            else ISNULL(History,'BEFORE')
        END
    from MyCTE2
)
select CustName, Country, RecordedTime--, D, c, RN_D, RN, CurrNo, Cnt, CntToday, RN_Old
    ,Audit = CASE when History='New' then 'ADD' else 'CHANGE'  END
    , History
from MyCTE3
--order by CustName, RecordedTime
)
GO

Pomocí této funkce je jednodušší provést vícenásobný test, ale pravděpodobně v produkci budete chtít použít přímý dotaz

-- Test
select * from F('2018-06-01') order by CustName , RecordedTime
select * from F('2018-06-02') order by CustName , RecordedTime
select * from F('2018-06-03') order by CustName , RecordedTime
select * from F('2018-06-10') order by CustName , RecordedTime
select * from F('2018-06-11') order by CustName , RecordedTime
select * from F('2018-06-12') order by CustName , RecordedTime
select * from F('2018-06-13') order by CustName , RecordedTime
select * from F('2018-06-14') order by CustName , RecordedTime

/**************** Aktualizace 2018-08-19 14:05 Izraelského času ****************/

Všiml jsem si, že je důležité přidat některé další informace kvůli účasti ve vláknu. Doufám, že to bude užitečné

Nejprve porovnejme procento využití zdrojů podle prováděcích plánů tří dotazů:(1) Moje řešení, (2) sekundové řešení maulik kansara po aktualizaci prvního řešení a (3) první řešení maulik kansara

Nyní se podívejme na obrázek EP řešení sekund maulik kansara:

Tento dotaz prohledá tabulku 11krát!